Headrest Tablet Mount Kit-MEDIUM
Headrest Pole Measurements 95 to 211mm
SKU:216019
Headrest Tablet Mount Kit - SMALL
Headrest Pole Measurements 95 to 211mm
THE HOLDER
- Adjustable Tablet Holder fits Screen Height of 120 to 150 mm.
- Easy docking and removal.
- Comms ports, camera, and scanner buttons are accessible while docked.
FIRM & SECURE FIT
- The mount fits onto the headrest poles with an inner measurement of 95mm and a maximum outer of 211mm.
- Measure the Headrest poles and Screen Height before ordering.
MOVECLIP
- The kit is complete with a MoveClip, meaning the Holder can easily be removed from the Headrest Mount without using any tools.
- No damage to the vehicle interior.
AMPS PATTERN MOUNT HOLES
- The Pre-Drilled AMPS Pattern pilot holes make installing the MoveClip onto a Headrest Mount easy.
MORE INFO
- Supplied with installation instructions and an Allen key.
- Firm & Secure Fit
- MoveClip
- No Drilling Holes
- AMPS Pattern Mount Holes
| This Mount Fits | Headrest Poles 95mm to 211mm Screen Height of 120 to 150 mm |
| SKU | 216018 |
| Barcode # | 7320282160180 |
| Brand | ClicOn |
Below you will find the installation instructions for the Headrest Tablet Mount Kit - SMALL (SKU:216018), you can click on the images to open a larger version in a new tab
Step 1
1. Install headrest mount: Use the enclosed tool to remove the screws in the headrest mount so you get two parts. Place the attaching part of the mount onto the front side of the headrest. Place the other part of the mount, with the mounting plate, onto the back part of the headrest so the screws match the holes. Tighten the two screws so the mount is firmly in place. Adjust the position of the mounting plate and tighten the screw in the bottom.
Step 2
2. Attach holder: Place the holder above the MoveClip and press/slide it straight downwards so it snaps into place. Place the device in the holder: Place the device's upper part under the holder's upper part. Press upward so the upper part of the holder slides upwards. Press the lower part of the device forward so the device is placed straight in the holder. Release the pressure so the device is held straight in place. Press downwards on top of the holder, and at the same time, tighten the wingnut on the back of the holder. IMPORTANT: It is essential to press downward HARD on top of the holder and to tighten the wingnut FIRMLY so the device is correctly held in place in the holder.
Step 3
3. Remove the device from the holder: Loosen the wingnut on the back of the holder. Press the device upward so the upper part of the holder slides upward. Lift the device downward out of the holder. Remove holder from MoveClip: Press the latch on the upper part of the MoveClip forward. At the same time, push/slide the holder upward and out of the MoveClip.
Step 4
4. The headrest mount and holder are in place.
Our Price
$149.90
One Year Warranty
Free Shipping Over $110.00
30 Days Return Policy
Australian Owned & Operated
