THE MOUNT WITHOUT A HOLDER (Choose your Holder Separately)
NO HOLES, NO DRILLING
EASY INSTALL
CUSTOM DESIGN IN SWEDEN
| This Mount Fits | Ford Everest Year(s):16-22 |
| SKU | 655183 |
| Barcode # | 7320286551830 |
| Brand | ClicOn |
| Shipping Weight | 0.1000kg |
Below you will find the installation instructions for the Angled Mount (SKU:655183), you can click on the images to open a larger version in a new tab
1. Attaching part (the smallest part) ClicOn face plate Peel off the adhesive tape cover on Part 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Prize the gap wider with the gap opener, in the same time press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 rightwards so the angled edge hooks behind the control panel. Pull out the gap opener. Open up the predrilled holes in with a screwdriver (Philips). Press the gap opener into the gap in the dashboard overhang. Prize the gap wider with the gap opener, in the same time press the grooved edge on into the gap next to the gap opener. Start by pressing the right corner of the grooved edge into the gap, then follow through and press all the edge into the gap. Pull out the gap opener. Slide sideway so the holes match with the holes in Part 1. Screw onto Part 1 with the enclosed screws. The ClicOn is in place.
1. Attaching part (the smallest part) ClicOn face plate Peel off the adhesive tape cover on Part 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Prize the gap wider with the gap opener, in the same time press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 rightwards so the angled edge hooks behind the control panel. Pull out the gap opener. Open up the predrilled holes in with a screwdriver (Philips). Press the gap opener into the gap in the dashboard overhang. Prize the gap wider with the gap opener, in the same time press the grooved edge on into the gap next to the gap opener. Start by pressing the right corner of the grooved edge into the gap, then follow through and press all the edge into the gap. Pull out the gap opener. Slide sideway so the holes match with the holes in Part 1. Screw onto Part 1 with the enclosed screws. The ClicOn is in place.
1. Attaching part (the smallest part) ClicOn face plate Peel off the adhesive tape cover on Part 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Prize the gap wider with the gap opener, in the same time press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 rightwards so the angled edge hooks behind the control panel. Pull out the gap opener. Open up the predrilled holes in with a screwdriver (Philips). Press the gap opener into the gap in the dashboard overhang. Prize the gap wider with the gap opener, in the same time press the grooved edge on into the gap next to the gap opener. Start by pressing the right corner of the grooved edge into the gap, then follow through and press all the edge into the gap. Pull out the gap opener. Slide sideway so the holes match with the holes in Part 1. Screw onto Part 1 with the enclosed screws. The ClicOn is in place.
1. Attaching part (the smallest part) ClicOn face plate Peel off the adhesive tape cover on Part 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Prize the gap wider with the gap opener, in the same time press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 rightwards so the angled edge hooks behind the control panel. Pull out the gap opener. Open up the predrilled holes in with a screwdriver (Philips). Press the gap opener into the gap in the dashboard overhang. Prize the gap wider with the gap opener, in the same time press the grooved edge on into the gap next to the gap opener. Start by pressing the right corner of the grooved edge into the gap, then follow through and press all the edge into the gap. Pull out the gap opener. Slide sideway so the holes match with the holes in Part 1. Screw onto Part 1 with the enclosed screws. The ClicOn is in place.
