Hard Wired Charging Adjustable Holder
Fits: Width 70-83 mm Slot 2-10 mm.
THE HOLDER
- Attach to the Mount to hold your device firmly & securely using the screws provided. The Holder can also form part of your solution.
FIRM & SECURE FIT
- Customised design to firmly fit and hold your smartphone securely.
DESIGNED TO BE USED WITH STANDARD SKINS OR COVERS
- Dimension: To fit Width: 70-83 mm, Thickness 2-10mm.
- If you are using a skin or cover make sure you measure the Height, Width and Thickness of the device with the skin or cover on, BEFORE ORDERING.
HARDWIRE INSTALL
- USB Port Cig-Plug Charger that supports Qualcomm QC 2.0A quick charge.
- Quick charge only, works with compatible devices.
AMPS PATTERN MOUNT HOLES
- Mounting the Holder onto a Car Dashboard Mount is made easy with the AMPS hole mounting plate.
LANDSCAPE TO PORTRAIT
- All ClicOn holders come with a tilt swivel that can rotate 360° and tilt the holder 17° in any direction for optimal viewing and avoiding light reflection.
Please Note: This Holder connects directly to the vehicle's power system output 5 Volts. A professional installer is recommended.
- The Holder
- Firm & Secure Fit
- Hardwire Install
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
This Holder Fits | iPhone X / XR / Xs / 11/ 11 Pro |
SKU | 727013 |
Barcode # | 7320287270136 |
Brand | ClicOn |
Shipping Weight | 0.1500kg |
Below you will find the installation instructions for the Hard Wired Charging Adjustable Holder (SKU:727013), you can click on the images to open a larger version in a new tab
Step 2
1. To adjust the holder for your device: Loosen the screws on the holder's front side, so the holder's sides can be adjusted. Place the device in the holder and press the sides together, so the device is firmly in place. Tighten the screws on the front side of the holder. 2. Loosen the screw in the centre of the holder to remove the tilt swivel attaching plate on the back. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws.
Step 3
3. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place but still can be adjusted. NOTE! It is important to slide the device STRAIGHT DOWNWARD into the holder and STRAIGHT UPWARD out of the holder.
Our Price
One Year Warranty
Free Shipping Over $110.00
30 Days Return Policy
Australian Owned & Operated