Non Charging Holder
Designed to be used WITHOUT a Case
SKU:711399
Key Lock Hard Wired Charging Holder
Built-In Key Lock
TWO-PART SOLUTION
- ClicOn Holders attach to a ClicOn Mount to hold your device securely. One part of a two-part solution, or form part of your kit.
FIRM & SECURE FIT
- Customised design to firmly fit your tablet without a case.
BUILT-IN SPRING KEY LOCK
- Built-in Key Lock supplied with two keys
- The Holder is also suitable for retail stores and exhibitions where security is essential.
HARDWIRE INSTALL
- Dual USB Port Hard-Wire Charger that supports 12/24 Volts.
- Quick charge only, works with compatible devices.
- Green USB Port: QC 3.0A for a quick charge.
- White USB Port: 2.4A for charging a second device.
AMPS PATTERN MOUNT HOLES
- The AMPS Pattern Mount Plate on the Holder can easily attach to our pedestal mounts, headrest mounts, bar mounts, and forklift mounts or form part of your solution.
LANDSCAPE TO PORTRAIT
- All ClicOn Holders come with a tilt swivel that can rotate 360°; tilt the Holder 17° in any direction for optimal viewing and avoid light reflection.
Please Note: This Holder connects directly to the vehicle's power system and outputs 5 Volts. A professional installer is recommended. Mounting a Tablet onto a ClicOn Dashmount is always done at the customer's own risk. Consideration should be given to the position and how firmly the dash mount holds the tablet's weight.
- Two-Part Solution
- Firm & Secure Fit
- Key Lock
- Dual Cig Plug USB-A Ports: QC 3.0A + 2.4A
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | Samsung GalaxyTab A 9.0 SM-X110/SM-X115 |
| SKU | 736399 |
| Barcode # | 7320287213997 |
| Brand | ClicOn |
| Shipping Weight | 0.5680kg |
Below you will find the installation instructions for the Key Lock Hard Wired Charging Holder (SKU:736399), you can click on the images to open a larger version in a new tab
Step 1
Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.
Step 2
Slide the device sideways carefully into the holder. Slide the locking part sideways. Press the button to lock.
Step 3
Use the enclosed key to open the lock. Slide the locking part sideways. Slide the device sideways out of the holder.
Step 4
The holder is in place. Switch between portrait and landscape mode by turning the holder into desired position.
Our Price
$139.90
One Year Warranty
Free Shipping Over $110.00
30 Days Return Policy
Australian Owned & Operated
