Non Charging Holder with Case
With Brodit Magnetic Case
SKU:711404
Hard Wired Charging Holder with Case
With Brodit Magnetic Case
THE HOLDER WITHOUT A MOUNT (Choose your Mount Separately)
- Attach the Holder to the Mount using the screws provided.
FIRM & SECURE FIT
- Customised design to firmly fit and hold your phone securely with the Brodit Magnetic Case.
THE CASE WITH MAGNETIC RING
- A stylish and modern case with a soft TPU edge and a hardback that provides protection.
- The soft, raised edges on the front and around the camera provide protection when placed on a hard surface.
- The built-in magnetic ring allows it to be used with a wireless magnetic charger.
- The Brodit Magnetic Case is compatible with Apple MagSafe accessories.
HARDWIRE INSTALL
- Dual USB Port Hard-Wire Charger that supports Qualcomm QC 3.0A quick charge.
- Quick charge only, works with compatible devices.
- 1 x USB-C: QC 3.0A for a quick charge.
- 1 x USB-A: 2.4A for charging a second device.
AMPS PATTERN MOUNT HOLES
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
LANDSCAPE TO PORTRAIT
- All ClicOn holders come with a tilt swivel that can rotate 360° and tilt the holder 17° in any direction for optimal viewing and avoiding light reflection.
Please Note: This Holder connects directly to the vehicle's power. A professional installer is recommended.
- The Holder without a Mount
- Firm & Secure Fit
- Hardwire Install
- The Caste with Magnetic Ring
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | Samsung Galaxy S24 SM-S921B/DS with Brodit Magnetic Case |
| SKU | 727404 |
| Barcode # | 7320287274042 |
| Brand | ClicOn |
| Shipping Weight | 0.1100kg |
Below you will find the installation instructions for the Hard Wired Charging Holder with Case (SKU:727404), you can click on the images to open a larger version in a new tab
Step 1
1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back.
Step 2
2. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws.
Step 3
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place but still can be adjusted.
Step 4
4. The holder is in place.
Warranty
One Year Warranty applies to products purchased directly from HoldMyPhone or an authorised re-seller.
During this warranty period if the product is defective in workmanship or materials HoldMyPhone will replace it with a model of equal value.
Damages caused by improper use, accident, unauthorized repair or modifications are not covered under this warranty.
Our Price
$149.90
One Year Warranty
Free Shipping Over $110.00
30 Days Return Policy
Australian Owned & Operated
